PL EN
Effect of cumulation on detonation velocity of low sensitivity explosives
 
 
Więcej
Ukryj
1
University of Mining and Geology "St. Ivan Rilski"
 
 
Autor do korespondencji
Zdravka Mollova   

University of Mining and Geology "St. Ivan Rilski"
 
 
Mining Science 2023;30:171-181
 
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
In an effort to improve the parameters of the blasting works carried out with low-sensitivity explosives, bearing in mind the studies of the cumulation phenomenon and the modern knowledge of the concentra-tion of energy in a certain direction or place, studies of the detonation speed at different diameters of the charge of the coarse explosives were carried out - Anfo type with intermediate detonator 900g cast booster with and without cumulative funnel (CF). Tests carried out in landfills and industrial conditions have shown that the type of intermediate detonator significantly affects the detonation speed, and there-fore also affects the other explosive characteristics of the explosives. The highest detonation velocity was achieved when the explosives were initiated with cast boosters with cumulative funnels. Tests have shown that when initiating coarse explosives with boosters with CF, stable detonation of the charges is obtained with optimal fragmentation of the material, and the mass of the used explosives is reduced by 14%. Their use in carrying out blasting works with low-sensitivity explosives of the emulsion and coarse-disperse type leads to an increase in the blasting efficiency, achieving better crushing of the rocks and reducing the costs of additional crushing of the non-gauge.
REFERENCJE (10)
1.
BELIN V., MITKOV V., 2015, Influence of the quality of explosive materials for industrial use on the efficiency of rock mass crushing by the explosion, Newsletter – National Organization of Explosive Engineer in Support of Professional Development, No. 2, 37–39.
 
2.
MITKOV V., 2009, New cast booster type donor charges from utilization ammunition, Annual of the University of Mining and Geology “St. Ivan Rilski”, 147–150.
 
3.
MITKOV V., 2007, Production of explosives for civil purposes, 387 pp.
 
4.
MITKOV V., 2011, Study in practice on the blasting parameters of waterproof explosive type slurry. Conference proceedings from the International conference of Blasting techniques, Stara Lesna, Slovak Republic, 50–58.
 
5.
MITKOV V., 2007, The state of production of waterfilled slurry explosives in the Republic of Bulgaria. Conference proceedings from the International conference of Blasting techniques, Stara Lesna, Slovak Republic, 57–65.
 
6.
MITKOV V., 2014, Influence of the type of donor charge on the detonation velocity of granulites, Mining Informational and Analytical Bulletin – Scientific and Technical Journal, No. 9, 305–309.
 
7.
MITKOV V., BELIN V., SHISHKOV P., 2022, Insensitive and high-powered explosive material development to manufacture cumulative charge cutters, MIAB. Mining Inf. Anal., 6, Bull., 2022, ISBN: 0236-1493.
 
8.
ORLENKO L.P., 2002, Physics of explosion, Fismatlit, Moscow, 656 pp.
 
9.
STOILOVA S., MITKOV V., BELIN V.A, 2014, Comparison of the performance of a TNT charge detonated in open conditions and blast hole with stemming conditions, Annual of the University of Mining and Geology “St. Ivan Rilski”, 111–114.
 
10.
ZAID I.O., HAWKYARD J.B., JONSON W., 1971, Experiments in plate cutting by shaped high explosive charges, J. Mech. Eng. Sci., Vol. 13, No. 1.
 
eISSN:2353-5423
ISSN:2300-9586
Journals System - logo
Scroll to top