PL EN
 
PL EN
Current issue
Archive
About the Journal
Editorial Team
Reviewers
Reviewing procedure

Topic Mine engineering and construction, underground construction

 

Study on rock-breaking characteristics of constant section and spherical tooth hob with the aid of slot produced by water jet
Xuhui Zhang, Kang Long, Tao Tan, Sijia Li, LianLian Tan
Mining Science 2024;31:61-79
DOI: https://doi.org/10.37190/msc243104
 

Optimizing rock fragmentation in open-pit mines through fuzzy intelligent prediction method
Isa Masoumi, Behrooz Zabihi, Shiba Masoumi
Mining Science 2024;31:21-38
DOI: https://doi.org/10.37190/msc243102
 

The challenge of reducing diesel consumption and greenhouse gas emissions: A perspective on the use of hydrogen in mining trucks
Robson Lage Figueiredo, Carlos Enrique Arroyo Ortiz, José Margarida Silva
Mining Science 2024;31:7-20
DOI: https://doi.org/10.37190/msc243101
 

Method for calculation of the carrying capacity of the bottomhole zone of a gas-bearing formation
Zakhar Rizo, Leonid Vasyliev, Dmytro Vasyliev, Stanislav Avramenko
Mining Science 2023;30:135-145
DOI: https://doi.org/10.37190/msc233008
 

New theoretical method for establishing indentation rolling resistance
Martyna Konieczna-Fuławka
Mining Science 2023;30:99-111
DOI: https://doi.org/10.37190/msc233006
 

Relationship between the geometry of the transition section and the loads acting on the conveyor belt
Dariusz Woźniak, Monika Hardygóra
Mining Science 2023;30:83-97
DOI: https://doi.org/10.37190/msc233005
 

Underground testing of load bearing capacity of rock bolting as part of the verification of its proper selection.
Dariusz Lubryka, Maciej Madziarz
Mining Science 2023;30:63-81
DOI: https://doi.org/10.37190/msc233004
 

Numerical Simulation Analysis Of Rock Breaking Of Cutting Part Of Roadheader With A Transverse Head Under Different Design Parameters
Dijie Xie, Daiyong Lin, Yao Wu, Zhangfu Huang
Mining Science 2023;30:45-62
DOI: https://doi.org/10.37190/msc233003
 

Research on Comprehensive Performance of the Arrangement of Picks on the Cutting Head Of The Transverse-Axis Driving Anchor Machine
Zhangfu Huang, Daiyong Lin, Zongming Zhu, Quanming Ning, Xi Xu, Zhipeng Jiang
Mining Science 2023;30:7-27
DOI: https://doi.org/10.37190/msc233001
 

Examination and assessment of the impact of working conditions on operating parameters of selected conveyor belts
Mirosław Bajda, Monika Hardygóra
Mining Science 2022;29:165-178
DOI: https://doi.org/10.37190/msc222910
 

Investigation on rock cutting characteristics of spherical-tooth hob
Xuhui Zhang, Zhaomin Long, Yashi Liao, Jinjing Long, Jifu Liu
Mining Science 2022;29:121-144
DOI: https://doi.org/10.37190/msc222908
 

Research on Key Parameters of Gob-Side Entry Retaining Formed by Roof Cutting of Working Face under Goaf in Close Distance Coal Seams
Fuxin Shen, Yanqi Song, Wenchao Zhao, Hongfa Ma, Junjie Zheng, Zhixin Shao
Mining Science 2022;29:19-39
DOI: https://doi.org/10.37190/msc222902
 

Influence of adhesion on stress-strain condition alongside of a full column resin cartridge rock bolt
Kateryna Sheptak, Ivan Sakhno, Waldemar Bolesław Korzeniowski, Svetlana Sakhno
Mining Science 2021;28:233-245
DOI: https://doi.org/10.37190/msc212817
 

Computational Model of the Basic Efficiency Parameters of the Bucket Wheel Excavator Working in a Block With a Vertical Obstacle
Anna Nowak-Szpak
Mining Science 2021;28:189-200
DOI: https://doi.org/10.37190/msc212814
 

Preliminary support design for underground mine adit, Artana mine, Kosovo
Gzim Ibishi, Kemajl Zeqiri, Musa Shabani, Joze Kortnik, Mehmet Erdinç Bilir, Melih Genis, Mahmut Yavuz, Muhamedin Hetemi, Gürkan Bacak
Mining Science 2021;28:141-159
DOI: https://doi.org/10.37190/msc212811
 

Comparison of Statistical versus Stochastic Models for Work Index Determination in Quartz-Marble Mixtures
Sebastian Pérez, Juan Vargas, Miguel Mellado, Ricardo Quevedo, Juan Jarufe, Juan Hurtado, Angelica Muñoz, Pamela Jara
Mining Science 2021;28:127-140
DOI: https://doi.org/10.37190/msc212810
 

Intelligent algorithms for routing sensory networks operating in explosion hazard zones
Krzysztof Stankiewicz, Jerzy Jagoda, Matthew Tonkins
Mining Science 2021;28:103-115
DOI: https://doi.org/10.37190/MSC212808
 

ESTIMATION OF AIR OVER-PRESSURE USING BAT ALGORITHM
Hesam Dehghani, Farid Alimohammadnia
Mining Science 2021;28:77-92
DOI: https://doi.org/10.37190/msc212806
 

Geomechanical substantiation of parameters of technology for mining salt deposits with a backfill
Jarosław Marek Rybak, Cheynesh Kongar-Syuryun, Yulia Tyulyaeva, Albert M. Khayrutdinov, Ivan Akinshin
Mining Science 2021;28:19-32
DOI: https://doi.org/10.37190/msc212802
 

Experimental Study on Radial Decoupling Charge Blasting with Air and Water
Deqiang Yang, Huaming An, Zhen Lei
Mining Science 2020;27:265-281
DOI: https://doi.org/10.37190/msc202718
 

EVALUATION SIGNIFICANCE OF DIFFERENCES BETWEEN THE GEOTECHNICAL PARAMETERS OF THE LITHOLOGICAL ROCKS ROOF LAYERS, ABOVE MINING EXCAVATION
Jan Kudełko, Maciej Bodlak
Mining Science 2020;27:183-197
DOI: https://doi.org/10.37190/MSC202713
 

UNIVERSAL APPROACH FOR RISK IDENTIFICATION AND EVALUATION IN UNDERGROUND FACILITIES
Witold Pytel, Krzysztof Fuławka, Bogumiła Pałac-Walko, Piotr Mertuszka, Jan Kisiel, Panu Jalas, Jari Joutsenvaara, Vitali Shekov
Mining Science 2020;27:165-181
DOI: https://doi.org/10.37190/MSC202712
 

THEORETICAL ANALYSIS OF SUPPORT STABILITY IN LARGE DIP ANGLE COAL SEAM MINED WITH FULLY-MECHANIZED TOP COAL CAVING
Yucheng Ji, Yinghua ZHANG, Zhian HUANG, Zhenlu SHAO, Yukun GAO
Mining Science 2020;27:73-87
DOI: https://doi.org/10.37190/msc202706
 

CHEMICAL ACTIVATION EFFECT ON THE MECHANICAL RESPONSE OF MORTARS BASED ON DUNE SAND
Djelloul Ladjel, Moncef Zairi, Larbi Belagraa
Mining Science 2020;27:61-71
DOI: https://doi.org/10. 37190/msc202705
 

Analysis of Explosion Stress Field of Air Radial Decoupling Charge
Deqiang Yang, Zhen Lei, Huaming An
Mining Science 2020;27:19-38
DOI: https://doi.org/10.37190/msc202702
 

An innovative person detection system based on thermal imaging cameras dedicate for underground belt conveyors
Fabian Uth, Bartosz Polnik, Wojciech Kurpiel, Ralph Baltes, Peter Kriegsch, Elisabeth Clausen
Mining Science 2019;26:263-276
DOI: https://doi.org/10.37190/msc192618
 

CONVEYOR BELT WEAR CAUSED BY MATERIAL ACCELERATION IN TRANSFER STATIONS
Błażej Doroszuk, Robert Król
Mining Science 2019;26:189-201
DOI: https://doi.org/10.37190/msc192615
 

Geomechanics of interference between the operation modes of mine working support elements at their loading
Volodymyr Bondarenko, Iryna Kovalevska, Gennadiy Symanovych, Vadym Sotskov, Mykhaylo Barabash
Mining Science 2018;25:219-235
DOI: https://doi.org/10.5277/msc182515
 

Optimizing splice geometry in multiply conveyor belts with respect to stress in adhesive bonds
Mirosław Bajda, Ryszard Błażej, Monika Hardygóra
Mining Science 2018;25:195-206
DOI: https://doi.org/10.5277/msc182514
 

Non-destructive characterisation of mortars reinforced with various fibres exposed to high temperature
Mohammed Ezziane, Laurent Molez, Ibrahim MESSAOUDENE
Mining Science 2018;25:193-208
DOI: https://doi.org/10.5277/msc182513
 

Influence of pick layouts on the performance of bolter miner cutting head
Shuo Qiao, Ailun Wang, Zaizheng Liu, Yimin Xia, Jinshu Liu
Mining Science 2018;25:161-174
DOI: https://doi.org/10.5277/msc182511
 

Blasting Control and Monitoring System for Safety Improvement during Blasting Operation. A Case Study in Guilaizhuang Gold Mine
Yang Cao, Hongguang Jl, Tianbao Zhang
Mining Science 2018;25:47-62
DOI: https://doi.org/10.5277/msc182504
 

Support parameters optimization and engineering application of roadway with broken-expand surrounding rock in deep
Weijian Yu, Genshui Wu
Mining Science 2017;24:252-268
DOI: https://doi.org/10.5277/MSC172415
 

THE EFFECT OF LIMESTONE FINENESS ON TERNARY CEMENT FRESH-STATE AND EARLY-AGE PROPERTIES
NOUI AMMAR, Leila ZEGHICHI
Mining Science 2017;24:195-208
DOI: https://doi.org/10.5277/msc172412
 

Experimental Investigation on the Effect of Marble powder on the performance of Selt-Compacting Concrete (SCC).
Larbi BELAGRAA, Nora Said DJEBRI, Zine Elabidine RAHMOUNI
Mining Science 2017;24:183-194
DOI: https://doi.org/10.5277/msc172411
 

THE SELECTION OF AN UNDERGROUND MINING METHOD USING THE FUZZY TOPSIS METHOD: A CASE STUDY IN THE KAMAR MAHDI II FLUORINE MINE
Mohammad Javanshirgiv, Mohsen Safari
Mining Science 2017;24:161-181
DOI: https://doi.org/10.5277/msc172410
 

Finite element analysis of load characteristic of shield bolter miner cutting head under complex coal seam condition
Shuo Qiao, Yimin Xia, Zaizheng Liu, Jinshu Liu, Bo Ning, Ailun Wang
Mining Science 2017;24:85-97
DOI: https://doi.org/10.5277/msc172405
 

CONTRIBUTION TO THE MAINTENANCE OF T4 BH DRILLING MACHINE (CASE OF THE MINE OF BOUKHADRA, ALGERIA)
Aoulmi Zoubir, Abdi Noura, Nouiri Yamina
Mining Science 2017;24:73-83
DOI: https://doi.org/10.5277/msc172404
 

Vibration analysis of rotating machines for an optimal preventive maintenance
Taleb Nonna Mounia, Chaib Rachid
Mining Science 2016;23:191-202
DOI: https://doi.org/10.5277/msc162316
 

A new tool in belts resistance to puncture research
Mirosław Bajda, Ryszard Błażej, Leszek Jurdziak
Mining Science 2016;23:173-182
DOI: https://doi.org/10.5277/msc162314
 

Slope stability analysis in open pit mines of Jebel Gustar Career, Ne Algieria- a multi-steps approach
Farid Zahri, Mohamed Laid Boukelloul, Riheb Hadji, Kourichi Talhi
Mining Science 2016;23:137-146
DOI: https://doi.org/10.5277/msc162311
 

RAM analysis of rotary drilling machines
Mohammad Javad Rahimdel, Hadi Hoseinie, Behzad Ghodrati
Mining Science 2016;23:77-89
DOI: https://doi.org/10.5277/msc162307
 

Performance study of low environmental impact mortars based on mineral additions and cement resistant to sulfate (CRS)
Larbi Belagraa, Abderrazak Bouzid
Mining Science 2016;23:65-76
DOI: https://doi.org/10.5277/msc162306
 

Institutional environmental protection and exploitation of rock deposits with open cast method
Urszula Kaźmierczak, Justyna Maria Górniak-Zimroz
Mining Science 2015;22:85-100
DOI: https://doi.org/10.5277/msc152208
 

Horizontal integration in the development strategy of mining companies
Jan Kudełko, Herbert Wirth, Cezary Bachowski, Joanna Katarzyna Gacek
Mining Science 2015;22:101-114
DOI: https://doi.org/10.5277/msc152209
 

Design of the shaft lining and shaft stations for deep polymetallic ore deposits: Victoria Mine case study
Sławomir Fabich, Jerzy Bauer, Magdalena Rajczakowska, Sławomir Piotr Świtoń
Mining Science 2015;22:127-146
DOI: https://doi.org/10.5277/msc152213
 

Stress-strain model study of ferrous tailing concrete short column restraint by hooping
Sujuan Li, Hongzhen Kang
Mining Science 2019;26:241-248
DOI: https://doi.org/10.37190/msc192616
 

STUDY ON INTENSIVE DESIGN AND CONTROL OF CHAMBER GROUP UNDER THE CONDITION OF WEAK SURROUNDING ROCK
Jun Yang, Shilin Hou, Kaifang Zhou, Bowen Qiao, Hongyu Wang, Qinglong Wei
Mining Science 2019;26:223-240
DOI: https://doi.org/10.37190/msc192614
 

Haulage System Selection for Parvadeh Coal mine Using Multi-Criteria Decision Making Methods
Mohammad Amin Ghasvareh, Mohsen Safari, Majid Nikkhah
Mining Science 2019;26:69-89
DOI: https://doi.org/10.37190/msc192606
 

STABILITY ANALYSIS OF SECURITY PILLARS WITH DI-MENSION 10 X 10 M FROMED BY ORE OF MINERAL BODY DURING THE EXPLOITATION OF THE "TREPÇA" MINE IN STANTËRG
Rafet Rafi Zeqiri, Jahir Gashi, Festim Kutllovci
Mining Science 2019;26:37-44
DOI: https://doi.org/10.37190/msc192603
 

A DATA DRIVEN DECISION MAKING APPROACH FOR LONG-WALL MINING PRODUCTION ENHANCEMENT
Amid Morshedlou, Hesam Dehghani, Hadi Hoseinie
Mining Science 2019;26:7-20
DOI: https://doi.org/10.37190/msc192601
 
Sign up for email alerts
 
Most read
Indexes
 
Keywords index
Topics index
Authors index
eISSN:2353-5423
ISSN:2300-9586
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top